(From: Lloyd E. Sponenburgh (email@example.com).)
|NotTaR of small Gasoline Engines and Rotary Lawn Mowers : How do you get the blade off a tractor m..
1994-2007, Samuel M. Goldwasser. All Rights Reserved. Reproduction of this document in whole or in part is permitted if both of the following conditions are satisfied: 1. This notice is included in its entirety at the beginning. 2. There is no charge except to cover the costs of copying.
I may be contacted via the Sci.Electronics.Repair FAQ (www.repairfaq.org) Email Links Page.
<< Riding mower stops period.. |
| About Wico magnetos >>
Typically, you remove the entire mowing deck, then manipulate the deck, rather
than the whole mower.
Alternatively, shops often LIFT the whole tractor, and work from underneath.
I built a beam-supported block and tackle affair in my barn to do just that...
it's lots faster than taking the deck off a stupid Murray. Those pieces of
trash require that you remove about a dozen fittings and nuts to get a deck
Now, my Wheel Horse, on the other hand, requires only ONE hand-released
fastener, and off-she-comes!